Preseason Hay Equipment Maintenance

Preseason Hay Equipment Maintenance

Take advantage of these rainy days to maintain your haying equipment and prevent costly downtime later.

First, inspect, lubricate, and service all power-driven areas such as belts, bearings, chains, and gears.  Set tension on belts and chains.  For sicklebar headers, check, sharpen, or replace cutterbar sections and adjust wear plates, hold-down clips, and guards.  Make sure your cutterbar has proper knife register. On disc mowers, replace knives and rotate or replace worn turtles over the knives.

Conditioning rollers often are overlooked.  Look for uneven wear and adjust the roll gap, roll timing, and roll pressure for your crop.

On round balers, inspect belts, chains, and slats or rollers frequently for wear.  Trim frayed edges and repair belts as needed to maintain uniform tension.  When not in use, keep belts clean and release belt tension.

Check plunger knife clearance and plunger alignment on rectangular balers and inspect the tying mechanism and adjust as needed.  Pick-up teeth on balers and on rakes frequently are broken or bent.  Replace defective teeth and adjust height if necessary.

Also, be sure you have replacement parts on hand for frequently broken or replaced items.  And most important of all, review your owner's manual to identify recommended maintenance procedures and proper settings.


Online Master of Science in Agronomy

With a focus on industry applications and research, the online program is designed with maximum flexibility for today's working professionals.

A field of corn.