Harvest timing is a major factor in maintaining quality and needs to be based on moisture content of the silage. Lots of corn silage in our area is cut too late.
Silage chopped wetter than 70% moisture can run or seep and often produces a sour, less palatable fermentation. More frequently, though, we chop corn silage too dry, below 60% moisture. Then it's difficult to chop and pack the silage adequately to force out air. The silage heats, protein and energy digestibility declines, and spoilage increases. If your silage is warm or steams during winter, it probably was too dry when chopped.
Many corn hybrids are at the ideal 60-70% moisture level as corn kernels reach the one-half milkline. This guide isn’t perfect for all hybrids, however, so check your field independently. Good silage usually can continue to be made up until black layer formation.
Corn kernels between half milkline and black layer in silage are more digestible. Drier, more mature corn grain tends to pass through the animal more often without digesting. Also, older leaves and stalks are less digestible.
Chopping silage at the right time can provide better feed and better profits.
Bruce Anderson
Extension Forage Specialist, Lincoln
| CropWatch |
| CW Archives |
|
 | ||
| Published by University of Nebraska-Lincoln Extension in the Institute of Agriculture and Natural Resources Cooperating with the counties and the U.S. Department of Agriculture. | ||
| The University of Nebraska-Lincoln does not discriminate on the basis of gender, age, disability, race, color, religion, marital status, veteran's status, national or ethnic origin, or sexual orientation. | ||